Brother MFC-9420CN Instrukcja Użytkownika Pobierz pdf (Strona 28)

Loading paper and documents

2 - 4

2

Envelopes

Most envelopes will be suitable for your

machine. However, some envelopes will

have feed and print-quality problems

because of the way they have been made. A

suitable envelope should have edges with

straight, well-creased folds and the leading

edge should not be thicker than two pieces of

paper. The envelope should lie flat and not be

of baggy or flimsy construction. You should

buy quality envelopes from a supplier who

understands that you will be using the

envelopes in a laser machine.

Envelopes can only be fed from Tray#1.

Note

Brother will not recommend a particular

envelope because envelope manufacturers

may change the envelope specifications. You

are responsible for the quality and

performance of the envelopes you use.

Before you put envelopes in the tray, check

the following:

■ Envelopes should have a lengthwise

sealing flap.

■ The sealing flaps should be folded crisply

and correctly (irregularly cut or folded

envelopes may cause paper jams).

■ Envelopes should consist of two layers of

paper in the area circled in Figure 1.

Note

■ Before you print envelopes, you must ‘fan’

the stack to avoid paper jams and

misfeeds.

■ Before you print a lot of envelopes, test

one to make sure that the print results are

what you want.

■ Envelope joints that are sealed by the

manufacturer should be secure.

■ Do not put different types of paper in the

paper tray at the same time because it

may cause paper jams or misfeeds.

■ For proper printing, you must choose the

same paper size from your software

application as the paper in the tray.

■ We recommend that you do not print

within 0.6 in. (15 mm) of the edges of

envelopes.

■ See Acceptable paper and other media on

page 2-1.

Feeding

direction

Figure 1

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 194 195

Komentarze do niniejszej Instrukcji

Brak uwag