Brother MFC-9420CN Instrukcja Użytkownika Pobierz pdf (Strona 81)

Troubleshooting

10 - 4

Printing problems

Print job is not printed

Make sure the status and configuration of the print server. Check following:

Make sure that the machine is powered on, is on-line and ready to print. Print the Network Configuration

List of the machine and check if the settings such as IP address settings are correct for your network.

See Printing the Network Configuration List on page 3-16 for information on how to print the Network

Configuration List on your print server.

The problem may be the result of mismatched or duplicate IP address. Verify that the IP address is

correctly loaded into the print server. And make sure that no other nodes on the network have this IP

address.

Verify that the print server is on your network as follows:

For Windows

(1) Try pinging the print server from the host operating system command prompt with the command:

ping ipaddress

Where ipaddress is the print server IP address (note that in some instances it can take up to two

minutes for the print server to load its IP address after setting the IP address).

(2) If a successful response is received, then proceed to Windows® 98/98SE/Me and Windows NT®4.0

Peer-to-Peer print (LPR) troubleshooting on page 10-5, and Windows® 2000/XP IPP

troubleshooting on page 10-6. Otherwise, proceed to Step 4.

For Macintosh

For Mac OS

9.1 to 9.2

(1) From the Apple menu, open the Chooser.

(2) Click the Brother Color (IP) icon, and make sure that your print server name appears in the right

frame. If it is visible, then the connection is good. Otherwise, go to Step 4.

For Mac OS

X 10.2.4 or greater

(1) From the Go menu, select Applications.

(2) Open the Utilities folder.

(3) Double-click the Printer Setup Utility icon. (For Mac OS

X 10.2.x users, double click the Print

Center icon)

1 2 ... 76 77 78 79 80 81 82 83 84 85 86 ... 93 94

Brak uwag

Brother MFC-9420CN Instrukcja Użytkownika Strona 81